Bolt Head Marking Chart
Identification Grade Mark |
Specifications | Material | Normal Size Dia. In |
Proof Load PSI (Mpa) |
Tensile Strength Min. PSI (Mpa) |
Yield Strength Min. PSI |
Bolt Rockwell Hardness |
Nut Rockwell Hardness |
||
Min | Max | Min | Max | |||||||
SAE J429 Grade 1 |
Low Carbon Steel | 1/4″ – 1 1/4″ | 33.000 | 60.000 | 36,000 | B70 | B100 | |||
SAE J429 Grade 2 |
1/4 ” – 3/4″ 3/4″ – 1 1/2″ |
55.000 33.000 |
60.000 74.000 |
57.000 36.000 |
B80 | B100 | C32 | |||
Property Class 5.8 |
Low or Medium Carbon Steel |
M5 – M24 | 55.100 (380) |
75.400 (520) |
B82 | B95 | C32 | |||
SAE J429 Grade 5 |
Medium Carbon Steel, Quenched and Tempered | 1/4 – 1 1″ – 1-1/2″ |
85,000 74,000 |
120,000 105,000 |
92,000 81,000 |
C25 C19 |
C34 C30 |
C32 | ||
ASTM A449 | 1/4″ – 1″ 1″ – 1-1/2 1-1/2″ – 3″ |
85,000 74,000 55,000 |
120,000 105,000 90,000 |
92,000 81,000 58,000 |
||||||
SAE J429 Grade 5.1 |
Low or Medium Carbon Steel, Quenched and Tempered | No. 6 thru 3/8 |
85,000 | 120,000 | C25 | C40 | ||||
SAE J429 Grade 5.2 |
Low Carbon Martensitic Steel, Quenched and Tempered | 1/4 thru 1 | 85,000 | 120,000 | 92,000 | |||||
ASTM A325 Type 1 |
Medium Carbon Steel, Quenched and Tempered | 1/2 thru 1 1-1/8 thru 1-1/2 |
85,000 74,000 |
120,000 105,000 |
92,000 81,000 |
|||||
A325 | ASTM A325 Type 2 |
Low Carbon Martensitic Steel, Quenched and Tempered | 1/2 thru 1 | 85,000 | 120,000 | 92,000 | ||||
A325 | ASTM A325 Type 3 |
Atmospheric Corrosion Resisting Steel, Quenched and Tempered | 1/2 thru 1 1-1/8 thru 1-1/2 |
85,000 74,000 |
120,000 105,000 |
92,000 81,000 |
||||
Identification Grade Mark |
Specifications | Material | Normal Size Dia. In |
Proof Load PSI (Mpa) |
Tensile Strength Min. PSI (Mpa) |
Yield Strength Min. PSI |
Bolt Rockwell Hardness |
Nut Rockwell Hardness |
||
Min | Max | Min | Max | |||||||
BB | ASTM A354 Grade BB |
Alloy Steel, Quenched and Tempered | 1/4 thru 2-1/2 2-3/4 thru 4 |
80,000 75,000 |
105,000 100,000 |
83,000 78,000 |
||||
BC | ASTM A354 Grade BC |
105,000 95,000 |
125,000 115,000 |
109,000 99,000 |
||||||
Property Class 9.8 |
Medium carbon steel, Quenched & tempered | M1.6 – M16 | 94.250 (650) |
130.500 (900) |
C27 | C36 | C32 | |||
SAE J429 Grade 7 |
Medium Carbon Alloy Steel, Quenched and Tempered | 1/4 thru 1-1/2 | 105,000 | 133,000 | 115,000 | |||||
SAE J429 Grade 8 |
Medium Carbon Alloy Steel, Quenched and Tempered | 1/4 thru 1-1/2 | 120,000 | 150,000 | 130,000 | |||||
ASTM A354 Grade BD |
Alloy Steel, Quenched and Tempered | |||||||||
No Grade Mark |
SAE J429 Grade 8.1 |
Medium Carbon Alloy or SAE 1041 Modified Elevated Temperature Drawn Steel | 1/4 thru 1-1/2 | 120,000 | 150,000 | 130,000 | ||||
SAE Grade 8.2 |
Low carbon boron martensite steel fully killed fine grain quenched & tempered |
1/4″ – 1″ | 120.000 | 150.000 | C35 | C42 | ||||
Identification Grade Mark |
Specifications | Material | Normal Size Dia. In |
Proof Load PSI (Mpa) |
Tensile Strength Min. PSI (Mpa) |
Yield Strength Min. PSI |
Bolt Rockwell Hardness |
Nut Rockwell Hardness |
||
Min | Max | Min | Max | |||||||
A490 | ASTM A490 | Alloy Steel, Quenched and Tempered | 1/2 thru 1-1/2 | 120,000 | 150,000 min 170,000 max |
130,000 | ||||
No Grade Mark |
ISO R898 Class 4.6 |
Medium Carbon Steel, Quenched and Tempered | All Sizes thru 1-1/2 |
33,000 | 60,000 | 36,000 | ||||
No Grade Mark |
ISO R898 Class 5.8 |
55,000 | 74,000 | 57,000 | ||||||
8.8 or 88 | ISO R898 Class 8.8 |
Alloy Steel, Quenched and Tempered | All Sizes thru 1-1/2 |
85,000 | 120,000 | 92,000 | ||||
10.9 or 109 | ISO R898 Class 10.9 |
Alloy Steel, Quenched and Tempered | All Sizes thru 1-1/2 |
120,000 | 150,000 | 130,000 | ||||
Property Class 10.9 |
Medium carbon alloy steel quenched & tempered |
M6 – M36 | 120.350 (830) |
150.800 (1040) |
C33 | C39 | C26 | C36 | ||
Property Class 12.9 |
Medium carbon alloy steel quenched & tempered |
M1.6 – M36 | 140.000 (970) |
176.900 (1220) |
C38 | C44 | C26 | C36 |
Mechanical
Mechanical Properties Of Fasteners
CLASS | New Designation | 4.6 | 4.8 | 5.6 | 5.8 | 6.6 | 6.8 | 6.9 | 8.8 | 10.9 | 12.9 | 14.9 | |||||||||||||||||||
Formerly | 4D | 4S | 5D | 5S | 6D | 6S | 6G | 8G | 10K | 12K | — | ||||||||||||||||||||
U.S. GRADE | 1 | 2 | 2 | 2 | 3 | 3 | 3 | 5 | 8 | — | — | ||||||||||||||||||||
Brinell |
|
|
|
|
|
|
|
|
|||||||||||||||||||||||
Rockwell |
|
|
|
|
|
|
|
|
|||||||||||||||||||||||
|
|
|
|
|
|||||||||||||||||||||||||||
Yield Point psi | 45,000 | 56,000 | 76,000 | 76,000 | 91,000 | 128,000 | 153,000 | 180,000 | |||||||||||||||||||||||
Tensile Strength psi |
|
|
|
|
|
|
|
|
|
Cap Screws
Hex Cap Screws
Nominal Or Basic Product Dia. |
E | F | G | H | R | LT | |||||||||||||||
Body Diameter | Width Across Flats | Width Across Corners |
Head Height | Radius of Fillet | Thread | Lngth. | |||||||||||||||
For Screw Lengths < 6 In. | For Screw Lengths > 6 In. | ||||||||||||||||||||
Max. | Min. | Basic | Max. | Min. | Max. | Min. | Basic | Max. | Min | Min. | Basic | Basic | |||||||||
|
0.2500 0.3125 0.3750 0.4375 |
0.2450 0.3065 0.3690 0.4305 |
7/16 1/2 9/16 5/8 |
0.438 0.500 0.562 0.625 |
0.428 0.489 0.551 0.612 |
0.505 0.577 0.650 0.722 |
0.488 0.557 0.628 0.698 |
5/32 13/64 15/64 9/32 |
0.163 0.211 0.243 0.291 |
0.150 0.195 0.226 0.272 |
0.015 0.015 0.015 0.015 |
0.750 0.875 1.000 1.125 |
1.000 1.125 1.250 1.375 |
||||||||
|
0.5000 0.5625 0.6250 0.7500 |
0.4930 0.5545 0.6170 0.7410 |
3/4 13/16 15/16 1-1/8 |
0.750 0.812 0.938 1.125 |
0.736 0.798 0.922 1.100 |
0.866 0.938 1.083 1.299 |
0.840 0.910 1.051 1.254 |
5/16 23/64 25/64 15/32 |
0.323 0.371 0.403 0.483 |
0.302 0.348 0.378 0.455 |
0.015 0.020 0.020 0.020 |
1.250 1.375 1.500 1.750 |
1.500 1.625 1.750 2.000 |
||||||||
|
0.8750 1.0000 1.1250 1.2500 |
0.8660 0.9900 1.1140 1.2390 |
1-5/16 1-1/2 1-11/16 1-7/8 |
1.312 1.500 1.688 1.875 |
1.285 1.469 1.631 1.812 |
1.516 1.732 1.949 2.165 |
1.465 1.675 1.859 2.066 |
35/64 39/64 11/16 25/32 |
0.563 0.627 0.718 0.813 |
0.531 0.591 0.658 0.749 |
0.040 0.060 0.060 0.060 |
2.000 2.250 2.500 2.750 |
2.250 2.500 2.750 3.000 |
||||||||
|
1.3750 1.5000 |
1.3630 1.4880 |
2-1/6 2-1/4 |
2.062 2.250 |
1.994 2.175 |
2.382 2.598 |
2.273 2.480 |
27/32 15/16 |
0.878 0.974 |
0.810 0.902 |
0.060 0.060 |
3.000 3.250 |
3.250 3.500 |
Grade 8 Alloy
Reliant Frame Bolts Grade 8 Alloy
Nominal Size Or Basic Major Dia. Of Thread |
E | F | G | B | U | H | LT | ||||||||||||||
Body Dia. | Width Across Flats | Width Across Corners |
Flange Dia. |
Flange Thickness | Head Height | Thread Lngth. | |||||||||||||||
L<6 In. | L>6 In. | ||||||||||||||||||||
Max. | Min. | Basic | Max. | Min. | Max. | Min. | Max. | Min. | Max. | Min. | Basic | ||||||||||
|
0.3750 0.5000 0.6250 0.7500 |
0.3690 0.4930 0.6170 0.7410 |
9/16 3/4 15/16 1-1/8 |
0.5625 0.7500 0.9375 1.1250 |
0.551 0.736 0.922 1.100 |
0.650 0.866 1.083 1.299 |
0.618 0.825 1.034 1.234 |
0.81 1.07 1.33 1.59 |
0.06 0.08 0.10 0.11 |
0.39 0.51 0.62 0.73 |
0.25 0.34 0.42 0.51 |
1.000 1.250 1.500 1.750 |
1.250 1.500 1.750 2.000 |